ZB 80JET SILVER SLANT DESIGN ADVANTAGES :
- JET 80CC SLANT ENGINE
The strongest bicycle racing engine out there. This engine features a 45 degree angled spark plug and include a steel intake manifold, with a larger inner diameter for improved performance. This engine has a 1 3/8 (1.375) inch diameter downtube engine mount accomodating the most common bicycle frames. Higher grade nuts and bolts are used throughout the entire engine.
- HIGH QUALITY FUEL LINE
Improved fuel line quality is included with these kits that don't get hard over time.
- IMPROVED GAS TANK FASTENERS AND MOUNTS
Strong gas tank clamps are now packaged which help create a secure bracket mount for the gas tank to the frame of the bicycle. The gas tank mounting bolts measure 1 1/8 (1.125) inches long and a spring loaded gas tank cap is included.
- NEW DESIGN IDLER PULLEY WITH ROLLER BEARINGS
Stronger and more durable idler wheels, and a quieter and more fluid roller system.
- THE LATEST RACING MUFFLER WITH LEG SHIELD & CLAMP
The hemispherical (half-circle) endcap and larger exhaust pipe diameter make for a smoother-running, more powerful engine. These mufflers are heat shielded to prevent your leg from coming in contact with the muffler. A clamp for holding the Exhaust Muffler to the frame of the bike is included with this package.
- LARGE FRAME TUBE ADAPTER
The large frame tube adapter accommodates up to 2 inch diameter down tubes.
This complete racing bicycle engine kit package comes with every thing that you'll need to put together and build your own racing engine, and proceed to convert any regular 26" single speed or multi speed mountain bike into a motorized bike. You'll still be able to pedal the bike and ride like normal or start the engine by releasing the clutch lever. There's no rope pulling needed. You can stop or start the engine as you ride. Twist grip hand throttle controls speeds from 38 to 53/kmph depending on the gear ratio. This installation kit comes with a 44 tooth 9 hole sprocket with easy to install 9 bolt universal mounting hardware that clamps over the rear wheel hub and spokes. This creates a totally independent drive sprocket and chain that does not interfere with your current drive chain or peddling.
With the built in clutch you maintain full function of the original bike. Pedal, shift, and ride your bike like normal. The engine kit only adds about 20lbs to your bike. When you want to engage the engine simply release the clutch hand lever and the engine springs to life. To power off, simply press the included kill switch.
What do I need to put my motorized bike together?
1. Requires basic mechanics and simple tools (any mechanical experience always helps!) There are a number of Youtube videos and references we offer to help with installation.
2. It takes about a few hours to install while using easy to follow detailed instructions (which can be found on our website at https://zoombicycles.com/pages/installation-help or by copying and pasting that URL link into your browser. If you are unable to download or access the site, please send us an inquiry and we will be happy to send you the details directly.
What type of bicycles with these racing engines fit on?
The racing engine requires a clearance of at least 15 inches in height on the seat tube (the part of the frame under the seat) and 14-15 inches in length on the down tube (the diagonal part of the frame), and it is approximately 5 inches wide. To help with determining whether or not the engine will fit in your frame, we have prepared a template for the engine which can be found by clicking here: Engine Template or by copying and pasting this URL link into your browser: https://cdn.shopify.com/s/files/1/0011/3881/9163/files/frametemplate.jpg?581847443183399922 .
We recommend installing these kits on bicycles with a 1 inch diameter seat tube and with a 1-1.25 inch diameter on the down tube.
We have a gallery available on our website and you'll be able to view a selection of bicycles that these engines have been installed on.
Model : ZB-80JET-SR
*Please note that all engine assembly parts are provided and will require 10-15 minutes to assemble the components of the engine. Some mechanical aptitude is recommended.
Engine type :
Single cylinder, air-cooled, 2-stroke
Power * Rotary Speed
Rated Power :
2.5Kw / 5000r / min
Max Power :
3.5Kw / 6000r / min
Ignition Mode : CDI
Fuel type : Octane 89 and above
Lubrication Oil : 2 Stroke Synthetic Motorcycle Oil
Mixing Ration for Fuel and Oil : 16:1 for new engines (20:1 after running approx 500Km)
Spark Plug : 4118C
Fuel Consumption : 2.5L / 100Km
Clutch Type : Friction Plate / Dry
Speed Limitation : 38-50km/hour
- 1 x Box of 80cc Class (66cc True Displacement) ZB-JET80-SR Complete Top End Assembly
- 1 x Push Clutch Lever
- 1 x Heavy Duty 415 Chain
- 1 x Chain Guard
- 1 x Throttle Cable (Adjustable)
- 1 x Exhaust Muffler (Heat shielded and racing tuned)
- 1 x Exhaust Muffler Support Clamp
- 1 x Adjustable Bearing Chain Tensioner
- 1 x Dished 44 Tooth sprocket with 9 oblong holes
- 1 x NT Speed Carburetor
- 1 x 80cc Class ZB-JET80-SR Complete Bottom End Assembly
- 1 x Box of Mounting Hardware and accessories (includes the following)
- 9 x Sets of Mounting Bolts, Washers and Nylock Locking Nuts for the Sprocket Assembly
- 2 x Rubber Sprocket Mounts
- 3 x Semi-circle Metal Sprocket Mounts
- 4 x Nylock Gas Tank Mounting Nuts
- 1 x Inline Soft Plastic Fuel Filter
- 1 x Gas Fuel Valve with Nylon Fuel Filter and Fibre Washer
- 1 x Chain Guard Fasteners
- 2 x Fuel Tank Fasteners
- 1 x Large Frame Tube Adapter mounting plate with U Bolt and Engine Adapter Bolts.
- 1 x 2L Glossy Black Finish Gas Tank
- 1 x Spring Loaded Gas Tank Cap
- 1 x High Quality Fuel Grade Line
- 1 x Thottle Assembly with built in Kill Switch and Matching Grip
- 1 x CDI (Capacitor Discharge Ignition) Module with mounting assembly
- 1 x ZB-JET80-SR Top End Assembly Pack (includes the following)
- 1 x Aluminum Head Gasket
- 1 x Cylinder Base Gasket
- 1 x Spark Plug
- 1 x Japanese Needle Bearing Cage
- 1 x Wrist Pin
- 4 x Lock Washer Set
User Manual (now accessible only through http://www.zoombicycles.com/installation)
- Includes all the specifications, performance ratings and parameters.
- Outlines Spark plug and clutch adjustment procedures.
- Troubleshooting tips.
- Basic installation of rear sprocket and engine instructions. More detailed instructions are also available (which can be accessed on our website at http://www.zoombicycles.com/installation)
- Parts breakdown and diagram of engine breakdown.
***SOME PARTS AND ACCESSORIES INCLUDED WITH THE BICYCLE ENGINE KIT MAY DIFFER FROM THOSE SHOWN IN THE PICTURES.***